JXF Series Low Voltage Control Box

JXF low-voltage distribution box is suitable for AC frequency of 50Hz, rated voltage of 400V and below, rated current of 400A and below three-phase three-wire or three-phase four-wire power system, the distribution line for the control and lighting power distribution.
For overload, short-circuit, and other problems of the line.
The product complies with GB/T 7251.12-2013 and other national standards, and has passed the type test and obtained CCC certificate.

Product Highlights
  • It provides protection against overload, short circuit and leakage.
  • The product has the advantages of novel structure, beautiful appearance, convenient and reliable installation.
  • The products are widely used in industrial and mining enterprises, shopping malls, hospitals, schools, buildings and other buildings and other places.

Overview

JXF low-voltage distribution box is suitable for AC frequency of 50Hz, rated voltage of 400V and below, rated current of 400A and below three-phase three-wire or three-phase four-wire power system, the distribution line for the control and lighting power distribution.

For overload, short-circuit, and other problems of the line. It provides protection against overload, short circuit and leakage. The product has the advantages of novel structure, beautiful appearance, convenient and reliable installation. The products are widely used in industrial and mining enterprises, shopping malls, hospitals, schools, buildings and other buildings and other places.

The products comply with GB/T 7251.12-2013 and other national standards, the products have passed the type test and obtained CCC certification.

Working Conditions

  1. Ambient air temperature: -30℃~+50℃ and the average temperature should not exceed +50℃ in 24h.
  2. Indoor altitude above sea level: Maximum installation altitude: 2000m
  3. Relative humidity should not exceed 50% at max temperature +50℃. Higher relative humidity is allowed at lower temperature. Ex. 90% at +20℃. But in view of the temperature change, it is possible that moderate dews will produce casually.
  4. Installation gradient not exceed 5°.
  5. The equipment shall be installed in a place where there is no violent vibration and impact, and the place where the electrical components are not corroded.
  6. Any specific requirement, consult with manufacture.

Technical Parameters

Technical parameter

No Name Unit Parameter
1 Main circuit rated voltage V AC: 400
2 Main circuit rated voltage V AC: 220, 380
3 Rated frequency Hz 50/60
4 Rated insulation voltage V 690
5 Rated current A 250
6 Protection level IP67
Product Technical Features
  • Electrical properties are fully in accordance with the relevant provisions of IEC 60439-1.
  • Feeder switch with small size, high breaking, short arc (or no arc) of the new type mold case circuit breaker and double tripping ,which is equipped with overload, short circuit protection function, and can be added with the leakage protection function as per client requirement.
  • Motor circuit with overload, short circuit, under voltage, lack of phase protection function.
  • Auxiliary circuit with local, remote control function and local, remote automatic selecting function.

Ordering Instructions

An order contract contains the following:
  1. The full model includes the main circuit and auxiliary circuit scheme;
  2. Combinatorial sequence diagram of main circuit system;
  3. Auxiliary circuit electrical schematic;
  4. List of components in the cabinet;
  5. Parameters such as voltage, current, time, etc.
  6. Other special requirements that do not conform to the normal use of the product.

Have you
Any Questions?

Can’t find an answer to your question, or want more information about our products? If so, please feel free to get in touch with our professional team. We’re here to help you drive your projects to success.

Contact us for a quotation